ASC Inventory Management: A Six-Step Method and the Numbers to Track
Supply costs are the second biggest line on your income statement, and the gap between a well-run center and a sloppy one can hit sixteen percentage points of margin. We walk through the exact six-step method to close that gap using staff you already have, no new software required.
Chapters:
0:06 Cold Open
0:37 The Setup
0:55 The Math That Should Scare You A Little
1:33 The Six Steps
2:57 Specialty Changes The Target, Not The Method
4:06 Where The Numbers Actually Live
4:52 What To Do This Quarter
5:37 Close
Free guide, The 2027 ASC State of the Union: https://sigmatic.ai/guide
Book a free consultation: https://sigmatic.ai/contact
#asc #surgerycenter #ambulatorysurgery #healthcarefinance #orutilization #ascmanagement #revenuecyclemanagement #medicalbilling
Chapters
- 00:06 Cold Open
- 00:37 The Setup
- 00:55 The Math That Should Scare You A Little
- 01:33 The Six Steps
- 02:57 Specialty Changes The Target, Not The Method
- 04:06 Where The Numbers Actually Live
- 04:52 What To Do This Quarter
- 05:37 Close
Transcript
Read the full transcript Every episode is transcribed, searchable, and quotable. Plain text
Sigmatic: Here's a number that should bother you a little. Supplies run anywhere from twenty point six percent of net revenue to thirty-six point eight percent, comparing a center in the twenty-fifth percentile to one in the ninetieth. Same line item. Sixteen percentage points apart. And here's the part that should really get your attention. That gap is almost never explained by patient mix. It's explained by what's written on a preference card versus what actually gets opened and used in the room.
Sigmatic: Supply cost is the second biggest line on your income statement, right behind labor. You can't call up the fee schedule and ask for more. At the median center, supplies eat about twenty-six point four percent of net operating revenue, and salaries and wages take about twenty-nine percent.
Sigmatic: Let's make this concrete. Take a two thousand dollar case. Now take the same case at the ninetieth percentile center. Supplies run seven hundred thirty-six dollars. That's a three hundred four dollar gap, on one case. That's before implants get their own line, before anesthesia, before room time, before a single dollar of overhead gets counted. And it shows up in the bigger numbers too. EBITDA margins run twelve point eight percent for centers under three million dollars in revenue, and thirty-seven point three percent for centers over nine million. Part of that is scale and contracting leverage.
Sigmatic: So here's the method we actually use, and I want to be clear, this is not a software purchase. It's a sequence you run with the staff you already have, starting with your top ten to twenty procedures by volume. Step one, count consumption, not the card. What matters is what got opened and used at the end of the case. Step two, cost every case by procedure and by surgeon. Net revenue minus direct supply cost, labor and overhead gives you contribution margin per case, and we've written a whole separate piece walking through that math in detail, I'll put the link in the description. Step three, set a target per procedure, using that twenty-one point six percent SIS benchmark as your starting line, or your own center's number if you're already beating it, and hold every surgeon doing that procedure to the same target. Step four, price your top twenty implants against contract, every quarter. In orthopedics and spine, implants alone push supply cost toward thirty percent of revenue, and vendor pricing drifts between quarters more than almost anyone checks. Step five, standardize preference cards for your top ten procedures, card by card, item by item, sitting down with the surgeons who actually do the cases. This is where most of that sixteen point spread lives. And step six, report supply cost per case by surgeon, every month, out loud.
Sigmatic: One honest caveat here. An ophthalmology center running near twelve to fifteen percent of revenue in supplies is not automatically better run than an orthopedic center running near thirty percent. Procedure mix sets the floor. A cataract tray and a spinal implant are not the same conversation, no matter how tight your cards are. The breakdown by specialty gets its own deep dive, the links are in the show notes if you want the full detail. What the six steps give you, no matter your specialty, is a way to measure your own center against the benchmark for your own mix, and to compare surgeon to surgeon on the exact same procedure. A four hundred dollar gap between two surgeons doing an identical case stops being an opinion once you've got the number on the table. One more thing worth saying out loud. The twenty twenty-six rule added five hundred sixty procedures to the ASC covered list, two hundred seventy-one of those moved off the inpatient only list. Some of those involve implants your materials team has never priced. Before any of those go on a block schedule, run them through the same case costing method. Medicare covering it is not the same as the economics working.
Sigmatic: None of this works if your data is scattered across three systems that don't talk to each other, consumption in the E M R, revenue in the practice management system, implant invoices sitting in a spreadsheet somebody updates when they remember to. That's the setup at most independent centers, and it's the quiet reason this method stalls out before it starts. The real test is simple. Can you produce supply cost per case, by procedure, by surgeon, for last month, inside a day? If getting that answer requires a consultant and three weeks, your system isn't doing the job this method needs it to do. We've written an honest comparison of what the current crop of E M R, billing and analytics tools actually delivers on this front, the links are below, I'll put them in the show notes.
Sigmatic: Three things, in order, with the people already on your payroll. First, pull actual consumption data, not the preference card, for your top twenty procedures by volume, and measure supply cost per case against that twenty-one point six percent SIS benchmark. Second, request current quotes on your top five implants or highest cost disposables, and compare them against the invoiced price on your last ten cases that used them. Third, standardize the preference card for your single highest volume procedure, with the surgeons who actually perform it, and put a date on the calendar to re-measure it. That's it. No new software, no big initiative, just a quarter of discipline pointed at the one line item you actually control.
Sigmatic: If you want to make your A S C more profitable, book a free consultation with us at sigmatic dot A I. And grab our free guide, The 2027 A S C State of the Union, it goes deeper into this and the other leaks we see most often. The links are in the show notes. Thanks for spending this time with us on The Margin, and I'll talk to you next time.
After the episode
Want a more profitable ASC?
Book a free 30-minute consultation on your own numbers, or leave your email and we will send the 2027 guide first.
Make your ASC more profitable.
A free 30-minute consultation on your own numbers: where the margin is, what to fix first. No obligation.