The Margin podcast cover art

The Margin · Analytics

Block Utilization: The Formula, the 2027 Benchmark and the Three Reasons Centers Miss It

Episode 5 · November 4, 2026 · 8 min

Forty-two percent of blocked OR time at the average ASC never turns into a finished case, and that gap quietly separates a 12.8% margin center from a 37.3% one. This episode breaks down the real block utilization formula, why centers consistently miss the 70% target, and the three low-cost fixes that recover lost minutes without adding rooms or staff.

Chapters:
0:02 Cold Open
0:50 What Block Utilization Actually Measures
1:54 The 2027 Benchmark
2:57 The Three Reasons Centers Miss It
3:54 Fixing It Without a Capital Project
5:20 How It Connects to the Rest of the Schedule
6:25 What to Do This Quarter
7:15 Close

Free guide, The 2027 ASC State of the Union: https://sigmatic.ai/guide
Book a free consultation: https://sigmatic.ai/contact

Read the full article: https://sigmatic.ai/blog/block-utilization-formula-benchmark

#asc #surgerycenter #ambulatorysurgery #healthcarefinance #orutilization #orscheduling #margin

Chapters

  1. 00:06 Cold Open
  2. 00:54 What Block Utilization Actually Measures
  3. 01:58 The 2027 Benchmark
  4. 03:01 The Three Reasons Centers Miss It
  5. 03:58 Fixing It Without a Capital Project
  6. 05:24 How It Connects to the Rest of the Schedule
  7. 06:29 What to Do This Quarter
  8. 07:19 Close

Transcript

Read the full transcript Every episode is transcribed, searchable, and quotable. Plain text

Sigmatic: Let me open with a number that should bother you a little. Across more than four hundred fifty ambulatory surgery centers, forty-two percent of blocked operating room time goes unused in an average month. Read that again. Almost half of the capacity you scheduled, staffed for, and paid rent on, never turned into a finished case. That gap is not a rounding error on a spreadsheet somewhere. It is a big piece of the distance between a center running near a twelve point eight percent EBITDA margin and one running near thirty-seven point three percent. So today, let's talk about block utilization. What it actually measures, why most centers quietly miss the target, and the fixes that cost you attention, not capital.

Sigmatic: Here's the part people get wrong first. Block utilization is not room occupancy. A room can look busy all day, lights on, staff moving, and still post a bad block number. The formula is this: minutes of cases that actually happened inside a surgeon's assigned block, divided by the total minutes of that block, calculated by surgeon and by month. Nobody else can touch those open minutes because on paper, they still belong to someone. That's the trap. You can stare at a full-looking schedule and still be bleeding capacity, because the schedule and the block are not the same thing. And getting this number right depends on getting the stuff around it right too. Late first cases eat usable minutes before the first incision even happens. Slow turnover eats minutes between cases that should have gone to the next patient. If you want the fuller picture of how OR scheduling, staffing and room design all fit together, I'll put the links in the description.

Sigmatic: The practical target, the number worth posting on a wall, is seventy percent or better. And block utilization never moves by itself. First case on time starts, where the median center hits only sixty-four point three percent against a practical floor of ninety percent. Turnover time, where the survey median for short cases runs twenty-eight point five minutes against a target under seven. And cases per OR per day, averaging four point four, with a typical center doing nineteen point four cases a day across its rooms. Here's a way to feel that number instead of just hearing it. Take a four room center running eight hours of block time a day. At forty-two percent unused, that center is paying staff and covering rent for roughly thirteen idle room hours a day, spread across those four rooms. That never shows up on your income statement as a line called wasted block time. It shows up as a supply cost percentage that looks fine, a labor cost percentage that looks fine, and a margin that is quietly, persistently worse than it should be.

Sigmatic: They're short on three specific habits. First, block time gets granted once and never taken back. Without a release or lose rule, usually forty-eight to seventy-two hours before the date, that unused time just sits there, locked and useless to anyone else. Second, nobody measures it by surgeon, out loud, where people can see it. A center wide average is comfortable because it hides everything. It hides the surgeon running at ninety percent and the one running at thirty. Third, late starts and slow turnover eat the block from the inside, even when it looks fully scheduled on paper. If the first case starts late, every case after it slides. Both of those quietly shrink the number of cases that actually fit inside a block that looked perfectly adequate on the printed schedule. If you want more detail on first case starts specifically, or on turnover benchmarks by specialty, the links are in the blog, click over and check them out.

Sigmatic: Here's the good news. The fix for block utilization is almost entirely a policy change, not a construction project or a new hire. Three moves account for most of the recovery we see centers make. One, publish a release or lose rule with a firm window, commonly forty-eight to seventy-two hours before the scheduled date, and a published order for who gets that reallocated time first. Surgeons respond to a clear, consistent, visible rule a lot faster than they respond to someone informally asking them to give back time they're not using. Two, report block utilization by surgeon, every month, on one page, right next to the seventy percent target. You don't even need commentary on it. A surgeon who sees their own forty-eight percent sitting next to a colleague's eighty-two percent will ask the scheduling question themselves. Three, tighten the two levers that quietly shrink usable minutes inside an otherwise fine looking block. Move first case patient arrival thirty minutes earlier and put one named person in charge of first case readiness. Pre-build case carts and run parallel room setup to attack turnover. None of that requires a new room or a new staff line. One more thing worth knowing, raw block utilization has a blind spot. A block can look strong just because it's busy during slow hours while sitting empty during your center's most valuable time of day. If your utilization number is climbing but the schedule still feels tight at peak times, that's a sign to look at prime time utilization specifically. The links are below, I will put them in the show notes.

Sigmatic: Block utilization is one of ten numbers that together describe how a center turns OR capacity into margin. First case starts, turnover, cases per OR per day, supply cost per case, staff hours per case, denial rate, days in accounts receivable, and EBITDA margin all sit alongside it. A center can hit seventy-five percent block utilization and still lose margin somewhere else entirely, which is exactly why this metric belongs on a scorecard, not standing alone as the one thing you check. And this matters more heading into twenty twenty-seven than it did even a year ago. The calendar year twenty twenty-six final rule added five hundred sixty procedures to the ASC covered list, with two hundred seventy-one of those moving off the inpatient only list. New covered procedures mean new case types competing for the same block time you already have. A center that can't measure its existing blocks, or reallocate them with any confidence, is going to have a much harder time deciding which surgeon gets the new volume and which block gives up time to make room for it.

Sigmatic: If you want a starting point, here are three steps, in order. One, pull twelve months of block data by surgeon and calculate utilization the exact way we described earlier, minutes used inside the block divided by minutes granted. Do this before you change a single policy. You need the honest baseline first. Two, publish your release or lose rule with that forty-eight to seventy-two hour window and a stated reallocation order, and start sharing the by surgeon utilization report every month starting with your very next cycle. Three, go fix first case on time starts and turnover on the blocks with the lowest utilization first. Those two changes recover usable minutes inside blocks you already have, before you ever need to have a conversation about adding a room or taking time away from anyone.

Sigmatic: Block utilization is one of those numbers that feels administrative until you realize it's actually a margin number wearing a scheduling costume. If you want to make your A S C more profitable, book a free consultation with us at sigmatic dot A I. We will go through your own numbers and show you where the margin is. And grab our free guide, The 2027 A S C State of the Union. The links are in the show notes. Thanks for spending this time with me. I'll see you next episode on The Margin.

After the episode

Want a more profitable ASC?

Book a free 30-minute consultation on your own numbers, or leave your email and we will send the 2027 guide first.

Make your ASC more profitable.

A free 30-minute consultation on your own numbers: where the margin is, what to fix first. No obligation.