The Margin podcast cover art

The Margin · Analytics

Turnover Time in the ASC: Benchmarks by Specialty and the Schedule Changes That Cut It

Episode 7 · November 4, 2026 · 6 min

The national median for OR turnover time is twenty-eight and a half minutes, but top centers hit single digits, and that gap is quietly costing surgery centers a full case slot every day. This episode breaks down the real benchmarks by specialty and the exact schedule changes that close the gap without hiring a single new person.

Chapters:
0:02 Cold Open
0:16 What Turnover Time Actually Is
0:55 The Benchmarks
1:49 Why Twenty Minutes Is a Sixth Case
2:48 Measure It By Room, Not As One Number
3:42 The Schedule Changes That Actually Work
4:53 What To Do This Quarter
5:49 Close

Free guide, The 2027 ASC State of the Union: https://sigmatic.ai/guide
Book a free consultation: https://sigmatic.ai/contact

#asc #surgerycenter #ambulatorysurgery #healthcarefinance #orutilization #ormanagement #healthcareops #turnovertime

Chapters

  1. 00:06 Cold Open
  2. 00:20 What Turnover Time Actually Is
  3. 00:59 The Benchmarks
  4. 01:53 Why Twenty Minutes Is a Sixth Case
  5. 02:52 Measure It By Room, Not As One Number
  6. 03:46 The Schedule Changes That Actually Work
  7. 04:57 What To Do This Quarter
  8. 05:53 Close

Transcript

Read the full transcript Every episode is transcribed, searchable, and quotable. Plain text

Sigmatic: Here's a number that should bother you if you run an A S C. The national survey median for operating room turnover time is twenty-eight and a half minutes. That gap isn't a rounding error.

Sigmatic: Let's get the definition straight first, because this gets confused constantly. Turnover time is the clock between one patient leaving the operating room and the next patient entering it. That's it. It covers room cleaning, instrument processing or cart exchange, equipment setup, and the circulating nurse doing her final check. It does not include anesthesia induction, and it is not the same thing as case length. Here's the other thing. Turnover time doesn't show up on a schedule the way a late first case does. A slow turnover just quietly stretches every case that comes after it. It looks full.

Sigmatic: So what are we actually measuring against. The national survey median, from O R Manager, sits at twenty-eight and a half minutes. That's the gap I keep coming back to, somewhere between eighteen and twenty minutes a case. A few more numbers worth knowing from that same data set. Average cases per operating room per day comes in around four point four. Average cases per day per center is about nineteen point four. The turnover problem is a different problem. It's about what happens in the room between patients. And here's the part that actually matters for your bottom line. The split in E B I T D A margin between small centers and large centers in that same research is twelve point eight percent versus thirty-seven point three percent. A slow-turnover center is paying the same staff, the same rent, the same equipment lease for more idle room minutes every single day. That's a direct line from a stopwatch number to a margin number.

Sigmatic: Let me do the math out loud because it's more dramatic than it sounds in a sentence. Take a room running five cases a day. At the twenty-eight and a half minute median, turnover alone eats up something like a hundred and forty two minutes of the day. At the gold standard, under ten minutes for complex cases, those same five turnovers take closer to fifty minutes. That's over ninety minutes recovered, depending on the specialty and how long the procedures run. Ninety minutes is close to a full case slot. You didn't add a room. You didn't add staff. You just stopped losing time between patients. This is the same math that shows up in block utilization conversations. HST Pathways found that forty-two percent of blocked operating room time goes unused across more than four hundred fifty centers they looked at in twenty twenty four. And if your center is also missing the first-case on-time start window, these two problems compound each other. Worth fixing them together, not one at a time.

Sigmatic: Here's a mistake I see constantly. Centers track one turnover average for the whole facility. That number tells you almost nothing useful. A G I room and a spine room do not turn over at the same speed, and averaging them together just hides which room is actually the problem. You have to break this apart by room and by case type. Pull the data for a full quarter before you change anything. Then compare the fastest twenty-five percent of turnovers against the slowest twenty-five percent for the exact same procedure in the exact same room. It's almost always process. Was the cart ready. Was the next patient staged. Did two tasks that could have run at the same time run one after the other instead. This is the same logic we talk about with block utilization, where the number that matters is utilization by surgeon, not one center-wide percentage.

Sigmatic: The good news here is that fixing turnover time is mostly a scheduling and logistics exercise, not a staffing increase. The centers that hit the gold standard tend to do the same handful of things, consistently, every day. First, pre-build case carts the day before for your top ten procedures by volume, so nobody is pulling supplies mid-turnover. Second, run parallel room setup, meaning cleaning staff start the moment the surgeon closes, not after the patient has physically left the room. Third, stage the next patient in pre-op and confirm they're ready before the current case even ends, so there's no dead time waiting on a patient who isn't there yet. Fourth, standardize instrument trays and preference cards by procedure, which removes a lot of the back and forth that slows processing down. And fifth, name one person per room who owns turnover time, the same way you'd name one owner for first-case readiness. None of that requires a new hire. It requires the same room by room, case by case discipline that drives pretty much every other number in your operating room. The links are below, I will put them in the show notes, if you want our full set of levers on operating room utilization in one place.

Sigmatic: If you want to move your turnover number without adding a single person to payroll, here's the order of operations. Step one, pull sixty to ninety days of turnover time by room and by case type straight from your scheduling system. Do not average across the whole center. Rank every room and procedure from slowest to fastest. Step two, take the two procedures with the highest volume and the slowest turnover, and start pre-building case carts for those two next week. Name one person per room who owns that number the way you'd name a first-case owner for morning starts. Step three, re-pull that same report in thirty days and compare it against the under-seven and under-ten minute benchmarks for those same case types. If the number hasn't moved, that tells you something specific. The fix was a logistics problem, not an intention problem, and your next move is to go stand in the room and watch an actual turnover happen.

Sigmatic: The links are in the show notes. If you want to make your A S C more profitable, book a free consultation with us at sigmatic dot A I. We will go through your own numbers and show you where the margin is. And grab our free guide, The 2027 A S C State of the Union. The links are in the show notes. Thanks for listening to The Margin, I'll talk to you next time.

After the episode

Want a more profitable ASC?

Book a free 30-minute consultation on your own numbers, or leave your email and we will send the 2027 guide first.

Make your ASC more profitable.

A free 30-minute consultation on your own numbers: where the margin is, what to fix first. No obligation.