OR Prime Time Utilization: What It Is and Why It Beats Raw Utilization
Raw OR utilization numbers can make an overbooked, overtime-heavy schedule look great while a tightly run room on a light day looks underutilized. This episode unpacks why prime time utilization, measured against the hours you've already staffed and blocked, is the number that actually reflects your margin.
Chapters:
0:02 Cold Open
0:20 The Setup
0:59 What Prime Time Actually Measures
1:37 Why Raw Utilization Lies To You
2:50 The Benchmarks And Where It Breaks
4:06 The Margin Difference
5:02 What To Do This Quarter
5:54 Close
Free guide, The 2027 ASC State of the Union: https://sigmatic.ai/guide
Book a free consultation: https://sigmatic.ai/contact
#asc #surgerycenter #ambulatorysurgery #healthcarefinance #orutilization #healthcareops #primetime
Chapters
- 00:06 Cold Open
- 00:24 The Setup
- 01:03 What Prime Time Actually Measures
- 01:41 Why Raw Utilization Lies To You
- 02:54 The Benchmarks And Where It Breaks
- 04:10 The Margin Difference
- 05:06 What To Do This Quarter
- 05:58 Close
Transcript
Read the full transcript Every episode is transcribed, searchable, and quotable. Plain text
Sigmatic: Here's a number that should bother you. Across more than four hundred fifty surgery centers, forty-two percent of blocked operating room time goes completely unused. Just sitting there empty while you pay the staff anyway. And most centers are measuring the wrong thing to even see it.
Sigmatic: Let's talk about how most centers track utilization, because I think it's quietly misleading a lot of good operators. Most of you already track some version of utilization. Fewer of you separate out the window that actually matters, which is prime time. That's the core block of your day, the hours your staff is clocked in, your rooms are open, and block has already been assigned. Often something like seven a m to three p m, though it shifts by center, specialty, and state staffing rules. Which means the ratio is easy to game without anyone trying to game it, and really hard to compare month over month.
Sigmatic: Prime time utilization fixes the denominator problem by asking a narrower, more useful question. During the hours you already staffed and already blocked, how much of that time actually had a patient in it. There isn't a separately published national benchmark just for prime time hours. So most centers borrow the same target used for block utilization, seventy percent or better, and apply it to their own defined prime time window. I'll put the links in the description if you want to dig into the full formulas, because there's a companion piece on how prime time relates to block and total room utilization that's worth a read.
Sigmatic: Here's where it gets a little unfair. A center that routinely pushes cases into overtime looks fully utilized by the raw number, because the denominator just stretches to match however long the day ran. Meanwhile a center that closes a room at one p m on a light day looks underutilized by that same math, even if every single prime time hour it used was packed. Neither number is actually telling you what you need to know, which is whether the hours you're already paying for are being used well. Block utilization data gets closer to the truth because it's measured against assigned time, which usually sits right inside the prime time window. That forty-two percent unused block time figure is measured in exactly that frame. Do the math on a four-room center running eight hours of block a day, and at that rate you're paying staff and rent for roughly thirteen idle room-hours every single day. Thirteen. That's not a rounding error, that's a line item. Think about what that means in practice. You've already scheduled the staff, you've already opened the room, the fixed cost already happened whether or not a patient shows up in it. An empty prime time hour is pure cost with nothing coming back the other way, which is exactly why raw utilization can hide it so easily.
Sigmatic: Let's ground this in the actual numbers, because I don't want to just wave my hands here. On first case on-time starts, the practical floor is ninety percent. The median center hits sixty-four point three percent. The ninetieth percentile hits eighty-eight point three percent. So even your best performers are a little shy of the floor, and the typical center is way off it. A late first case doesn't just cost its own delay, it pushes every case behind it, compresses the rest of prime time, and shoves your last case into overtime. On turnover, the gold standard is under seven minutes for short cases and under ten for complex ones. The survey median is twenty-eight point five minutes. And the output number that tells you whether your fixes are working is cases per O R per day, which averages four point four. I'll flag one honest caveat here. The turnover figure and the cases-per-room figure both come from a 2019 survey, and the first case on-time data comes from a separate benchmarking collaborative. There isn't a newer public survey covering the same ground at the same depth, so treat these as the best detail available, not as this morning's numbers. The block utilization figure is more current, pulled from 2024 data across those four hundred fifty-plus centers, which is part of why we lean on it so heavily.
Sigmatic: Now here's the part that should really get your attention. E B I T D A margin runs twelve point eight percent at centers under three million dollars in revenue, and thirty-seven point three percent at centers over nine million. That's not just a size effect. Larger centers tend to run more disciplined schedules, they start first cases on time more often, they turn rooms faster, which means more of their prime time hours actually carry a case. You can't buy your way into that discipline. You measure and manage the hours you already have. I'm not going to tell you prime time utilization alone closes that whole gap, and the size of any improvement depends entirely on where your center starts. But the data is consistent on this point. The difference between a thirteen percent margin and a thirty-seven percent margin is mostly operational, and prime time utilization is one of the clearest windows into that operational picture.
Sigmatic: So here's what I'd actually do, starting this quarter. First, write down your prime time window by room, in hours. Stop measuring utilization against total hours the building was open and start measuring it against that specific window. Second, pull your first case on-time start data for that same window, by surgeon, and compare it against the ninety percent floor and the sixty-four point three percent median. Third, track turnover separately inside prime time versus after hours, so a slow turnover late in the day doesn't get averaged into a number that looks fine on the monthly report but is hiding a real problem. None of this requires new software or new staff. It requires redrawing the boundary of what you're actually measuring, and then being honest with yourself about what that narrower number shows you.
Sigmatic: That's the whole idea behind prime time utilization. It's not a new metric for the sake of having a new metric, it's the honest version of a number you're probably already tracking wrong. If you want to see where your own center's prime time hours are leaking margin, we'd love to walk through it with you. If you want to make your A S C more profitable, book a free consultation with us at sigmatic dot A I. We'll go through your own numbers and show you where the margin is. The links are in the show notes. Thanks for spending this time with us on The Margin, we'll talk again soon.
After the episode
Want a more profitable ASC?
Book a free 30-minute consultation on your own numbers, or leave your email and we will send the 2027 guide first.
Make your ASC more profitable.
A free 30-minute consultation on your own numbers: where the margin is, what to fix first. No obligation.